02 September 06

Information on Updating The TimerCoreApp.

Note: An active internet connection is required for this to work.

1. Select the 'Monitor' tab of InHomeFre.

2. In the 'Events To Monitor' box select 'AllTextEvents', 
this will allow you to see the progress of the download.

3. Above the 'Execute Cmd' button is a list box, 
scroll down to 'dl=insteon.net:timercoreapp06' and select it.

4. Change the last two characters from '06' to '12' so that 
'dl=insteon.net:timercoreapp12' appears in the text box.

5. Click on the 'Execute Cmd' and the TimerCoreApp will be downloaded 
from the SmartHome site into your PLC. Be patient, this may take 
several minutes. The memo box will show the progress as xx=10%... 
After the download is complete the program will verify the download 
and show the progress of that. The last thing that happens is that 
the PLC will be reset.

Any timers that are already loaded will be gone, so you will need to 
'Set PLC Timers' again from the control tab. 

Ken